凝胶注模法制备多孔氧化铝陶瓷的研究

采用凝胶注模和加造孔剂的工艺,用甲基丙烯酸—羟乙酯(HEMA)取代丙烯酰胺(AM)作为单体,用十二烷基硫酸钠作为造孔剂,将样品于1600℃下保温2小时烧结,成功制备出了气孔率为80%的结构均匀的氧化铝多孔陶瓷。     

改性聚酰亚胺在摩托车中的应用

本研究选择了改性聚酰亚胺、改性聚甲醛、改性尼龙三种材料应用于摩托车衬套制品,进行了对比试验,结果表明:采用改性聚酰亚胺的衬套具有强度高、耐磨损、尺寸稳定性好等特点,完全达到该产品设计的要求。     

Some Insights into the Preparation of Pt/γ-Al2O3 Catalysts for the Enantioselective Hydrogenation of α-Ketoesters

Pt/γ-Al₂O₃ catalysts were prepared by two different impregnation methods and characterized by XRD, TEM, and CO chemisorption. The Pt particle sizes ranged in 2.4–23.3 nm for these 5.0 wt% Pt/γ-Al₂O₃ catalysts. The catalysts were also characterized by FT-IR spectroscopy using CO as a probe molecule before and after the chiral modification with cinchonidine. Two IR bands (2078 and 2060 cm^-1) due to CO linearly adsorbed on the Pt/γ-Al₂O₃ catalyst, calcined at 500 °C before reduction in sodium formate solution were observed, whereas only one IR band at ～2070 cm^-1 was observed for other catalysts. A red shift of the IR band was observed after chiral modification of all the catalysts, except the one with the largest Pt particle size and lowest Pt dispersion. The catalytic performance of the cinchonidine-modified Pt/γ-Al₂O₃ catalysts was tested for the enantioselective hydrogenations of ethyl pyruvate and ethyl 2-oxo-4-phenylbutyrate (EOPB). A 95% ee value was obtained for the ethyl pyruvate hydrogenation and about 83% ee was achieved for the enantioselective hydrogenation of EOPB under the optimized preparation and reaction conditions. It is deduced that the interaction of Pt with γ-Al₂O₃ is a crucial factor for obtaining high activity and that the adsorption abilities (adsorption of reactant, solvent and chiral modifier molecules) of the catalyst surface affect the catalytic performance significantly.     

溴素法α-溴代间氯苯丙酮合成研究

在金属卤化物催化剂 HD2 0 0 1存在下 ,溴与间氯苯丙酮在乙酸中反应得到盐酸安非他酮中间体 α-溴代间氯苯丙酮。最佳反应条件是 :n(间氯苯丙酮 )∶n(溴 ) =1∶ 1 ,催化剂用量为 1 %(质量分数 ) ,溴滴加时间为 1 h,反应温度为 1 0°C,此条件下 ,产物纯度为 98.83%,收率为 96.1 %。     

秦皇岛市海岸线遥感提取及变化监测

监测海岸线的变化是海岸带管理、海平面变化和海岸带演变研究中一项非常重要的任务,遥感技术凭借其高时效、大范围、低成本等特点正逐渐成为监测海岸线变化的重要手段。以秦皇岛市的海岸为例,结合海岸类型和潮位校正对高分辨率SPOT卫星影像进行海岸线提取,并利用同时期海岸线实地测量数据对海岸线提取进行精度验证,结果表明：使用该方法提取的海岸线精度较高。利用该方法得到研究区2006\,2009和2011年海岸线提取结果,通过叠加多时相海岸线监测其变化情况,并采用基线法定量分析北戴河砂质海岸线的变化,结果与实际情况相符。     

3-羟基-7-氧代-5,6-二氢吡唑[3,4-e]并-1,2,4-三嗪的合成

以3-氨基-5-吡唑啉酮为原料,合成了3-羟基-7-氧代-5,6-二氢吡唑[3,4-e]并-1,2,4-三嗪,并对目标物及文献中未见报道的中间体如3-氨基-5-氧代-4-吡唑啉酮腙衍生物等,通过元素分析I、R1、HNMR和质谱分析确定了其结构。     

7-甲基-3-羟基吡唑[4,3-e]并-1,3,4-噁二嗪的合成

以3-甲基-5-吡唑啉酮为原料,合成了标题化合物,并对目标物及文献中未见报道的中间体如3-甲基-5-氧代-4-吡唑啉酮腙衍生物等,通过元素分析I、R1、HNMR和质谱分析确定了其结构。     

计算机局域网硬件常见故障及维修处理方法

随着网络的逐步普及,局域网的建设走向信息化已成为必然选择,它不仅为现代化教学,综合化信息管理,办公自动化等一系列应用提供基本操作平台而且能提供多种服务。本人联系工作实践,阐述局域网常见故障和处理的方法,并针对计算机局域网常见硬件故障,提出相应处理对策。     

Hydrodesulfurization of model diesel using Pt/Al2O3 catalysts prepared by supercritical deposition

Pt/Al₂O₃ catalysts with Pt loadings ranging from 0.5 to 11 wt.% were synthesized by supercritical carbon dioxide (scCO₂) deposition method. Transmission electron microscopy (TEM) images showed that the synthesized catalysts contained small Pt nanoparticles (1–4 nm in diameter) with a narrow size distribution, no observable agglomeration, and uniformly dispersed on the alumina support. The catalysts were found to be active for hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-hexadecane (n-HD) without sulfiding the metal phase. The reaction proceeded only via the direct hydrogenolysis route in the temperature range 310–400 °C and at atmospheric pressure. The activity increased with increasing the metal loading. Increasing [H₂]₀/[DBT]₀ by either increasing [H₂]₀ or decreasing [DBT]₀, increased the DBT conversion. At a fixed weight hourly space velocity and feed concentration, conversion did not increase with increasing temperature beyond 330 °C. The presence of toluene inhibited the catalyst activity presumably due to competitive adsorption between DBT and toluene. Under the operating conditions, the reaction was far from equilibrium.     

Coverage enhancement by using the mobility of mobile sensor nodes

Coverage is a fundamental problem in sensor networks. Sensor coverage, which reflects how well a sensor network is monitored by sensors, is an important measure for the quality of service (QoS) that a sensor network can provide. In mobile sensor networks, the mobility of sensor nodes can be utilized to enhance the coverage of the network. Since the movement of sensor nodes will consume much energy, this mobility of sensor nodes should be properly managed by some pre-defined schemes or protocols. By noticing this issue, some existing works have proposed several movement-assisted sensor deployment schemes. These works assume that the target field is a 2-dimensional space. In this paper, we study a generalized case of this problem whereby the target field can be a space which ranges from 1-dimensional to 3-dimensional. Two variations of the movement-assisted sensor deployment problem with different optimization objectives were formulated. We identify a set of basic attributes which can be used as guidelines for designing movement-assisted sensor deployment schemes. Based on these attributes, we propose efficient algorithms for both variants of the movement-assisted sensor deployment problem.